Model 3D
EBARA Model 3D Standardized single-stage centrifugal pumps (EN 733). This is a commercial line product from EBARA which manufactured in Italia. 3D series is suitable for light industrial process, water supply, HVAC system, drinking water booster pump unit... This series is strategic product line from EBARA which is the intersection of technologies, creation and economy.
SPECFICATIONS | ||
Liquid Handled | Type of liquid | Clean water |
Temperature [°C] |
Min. -5 Max: +90 for Standard Version Max: +110 for H, HS, HW, HSW Version |
|
Maximum working pressure [bar] | 10 | |
Construction | Impeller |
Close centrifugal type for 32,40,50 series Reinforced lase welding for 40-200/11, 50-200/15 Closed centrifugal three dimensional blades for 65 series |
Shaft seal type | Mechanical seal | |
Bearing | Sealed ball bearing | |
Pipe Connection | Suction [inch] | Flange DN50, 65, 80 - EN 1092-2 |
Discharge [inch] | Flange DN32, 40, 50, 65 - EN 1092-2 | |
Material | Casing | Cast Iron EN-GJL-250-EN 1561 |
Impeller |
AISI 30 (32, 40, 50 series) AISI 316 made by precision casting (65 series) |
|
Shaft | AISI 304 (wet extension) |
MOTORS | ||
Type | Electric - TEFC | |
Single Phase | Three Phase | |
No. of Poles | 2 | |
Rotation speed [min-1] | ≈ 2800 | |
Power rating [kW] | 1.1 ÷ 2.2 | 1.1 ÷ 22 |
Frequency[Hz] | 50 | |
Voltage [V] | 230 ±10% |
230/400 ±10%(4kw) 400/690 ±10% |
Efficiency level | IE3 | |
Protection degree | IP55 |